N Scale Ships took the plunge, bought a small 3D printer and learned how to use 3D design tools. After just a few weeks many small parts and assemblies have been designed and produced. I had an advantage because many assemblies were already drawn in 2D and could be imported and adapted readily. Already done are anchors, cranes, passenger benches, masts with platforms and support structures, large and small davit mechanisms and platforms, hatches, running lights, windlasses, trawler net reels, storage lockers and many other topside and deck details like inspection covers and vents. Prices will be reduced as I revise the website (long overdue) and add online ordering.
As some have learned, I lost my beloved Kay in October 2018. Her illness required a substantial part of my time for the past two years. I can now pay more attention to this site and its products. While I doubt I will ever offer even smaller boats entirely 3D printed, the next step beyond details and assemblies is the cabin structures of some of the smaller ships where I can begin to add details like conduits, junction boxes, log desks and other details that were previously and painstakingly applied by hand. Attaching 0.5 mm squares for junction boxes, even with surgically sharp tweezers, is a challenge.
I will also be moving again, to a smaller house with a much bigger workshop. As always product suggestions are welcomed, if not always implemented.
I also changed my tag line to “Any Ship in N or Z or Thereabouts” to reflect to reflect the reality that I could not maintain an adequate supply of larger scale parts.
Good times and smooth sailing ahead!
2 thoughts on “3D Printing Added for Greater Detail, Less Cost”
I need the small cruise ship-How Much?
Anywhere from $135 USD for a kit of a small North Sea excursion boat to about $650 for a completed harbor cruise ship such as the Port Welcome or Happy Times III. Other ships could be adapted. I have about 100 ships that I offer as kits or completed ships. You might want to spend some time viewing the site to see what might fit your needs.